Ityhubhu entsha ye-DS T8

Inkangeleko kwaye kululangenxaufakelo—Uyilo lwebhanti lunokulungiswa ngokulula nangokugqibeleleyo eludongeni, kwisibuko okanye kwisilingi, akukho mfuneko yokusikwa. Kwaye iindawo zokufakela ziyafuneka simahla. Zizimele ngokupheleleyo kwaye azidingi ndawo yokuhombisa ingako.

Umbala omhlophe ofana nobisi—Ukusuka kwisiphumo sokubonakala, olu hlobo lombala lunokunyusa ukukhanya kwaye xa usebenzisa i-reflector yePC eqhotsiweyo, lunokunciphisa ukukhanya okukhazimlayo, ukuze ube nokukhanya okukhululekileyo eofisini yakho, kumagumbi okanye kwigumbi lokufundela.

I-Angle yeBeam—Ukusuka kwi-180° kunye nezibane ezimacala mathathu, ukuguquguquka ngakumbi ekuhombiseni nako kuyenza isebenze kakuhle.

Uyilo—Uyilo lweLiper lolwakho kwaye lwahlukile, imodeli nganye yenziwe ngeenkuni zethu. Awusoze ufumane imilo efanayo kwimarike.

Intoni'ngaphezulu

Ukonga amandla nge-90%

I-Lumen, engaphezulu kwe-90lm/W, iqinisekiswe yi-LM80

Ra>80

Umqhubi we-IC, iiyure ezingama-30000 ziyasebenza akukho ngxaki

IiTesi-ting

1. Inxalenye nganye yesinyithi, njengezikrufu, kufuneka ivavanywe ngomatshini wokutshiza onetyuwa, phantsi komswakama ophezulu kunye nendawo enetyuwa.

I-reflector ye-2.PC, uvavanyo lobushushu obuphezulu nobuphantsi phantsi kwe--45℃ ~ 80℃.

3. Gcwalisa ityhubhu ngaphambi kokuba uzise uvavanyo lokwaluphala lweeyure ezingama-48.

4. Ngenxa yokuba izibane kulula ukuziqhekeza, xa siyila iphakheji, siza kuvavanya ngomatshini wokushukumisa size siwe phantsi ukusuka kwi-1 mitha ukuphakama, i-2 mitha ukuphakama kunye ne-3 mitha ukuphakama okanye ngaphezulu ukujonga ukusebenza kokhuseleko.

Kwaye ityhubhu yeLiper ifanelekile ukusuka kwi-CE, iiRoH, iiCB njalo njalo.

Khetha iLiper, khetha ukukhanya okukhethekileyo nokufanelekileyo.