LED louver fitting Supplier – Classic Integrated T8 LED Tube – Liper

Easy for installation: It is batten design which is easy and perfect used to fit your requirement. This tube can be fixed on the wall, mirror, or ceiling and it is no need to cut out. Installing parts will be offered for free which is independent decoration and need less space.

 Drivers: Driver, the heart of the LED light. Due to the characteristics of LEDs, it can only adapt to a very narrow voltage and current range. Once the voltage exceeds the rated voltage, the luminous efficiency will be severely reduced or unable to light up, so different drivers are needed to ensure the LED works under the best voltage or current state. However, in different countries with different application voltages,Liper Lighting can provide three different drivers.

Type of Driver:100 - 240V, 160 – 240V, and 220 – 240V, BTW, these just our print standard, will be wider in actually used.

 Aluminum: LED lamps emit a lot of heat. If the heat cannot be dissipated from the light, it will cause problems of lights or even be damaged. For better performance, Liper uses high-quality aluminum material to dissipate the heat of the LED lamp, because the thermal conductivity of aluminum is 3 times of iron.

 Testing

Before production, every metal component will be tested in a salty spray machine to make sure the light will work perfectly in the high humidity and salty environment, and no rusty problem and keep fantastic appearance forever.

Reflector (PC) will be tested from -45℃ to 80℃ in high and low -temperature experiments, Ensure no deformation, cracking, yellowing and other problems.

Finished LED lights will be tested to drop from the height of 1 meter to 3 meters and shaking testing to ensure that our products will not be damaged during transportation.

 What’s more

90% energy saving

Lumen, more than 90lm/W

Ra>80

IC driver, promise 30000hrs working time